Car Covers | Car Bras

"MN" Series Mini-Mask Car Bra ...

Covercraft mini-mask car bra were designed to protect the area of the hood that takes the most abuse. The front area before the break of a hood is normally where most of the bugs hit and road damage occurs. This style of car bra offers an economical alternative to a full front mask and is easy to store when not in use.

Quality features you'll find in Covercraft car bras:

• Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface.
• Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature.
• Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks.
• We use a micro-perforated finish on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly.
• Our heavy-gauge leather grain vinyl has a soft, protective backing.We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask.
• Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings.